Tracking

3D Printing Materials

UMA 90

Get Instant Quote

At a glance

Process

Carbon DLS

Colors

Red, Blue, Yellow, White, Black

Resolution

0.075 mm

Max Print Size

189 x 118 x 326 mm

About the Material

UMA 90 thumbnail graphic

UMA 90 is a one-part rigid resin similar to conventional SLA resins. It is available in white, black, grey, cyan, yellow, and magenta colors that may be mixed freely to your specification before printing. As a one-part resin, UMA 90 it can be printed quickly and cheaply. It is well suited for producing manufacturing jigs, fixtures, and general purpose prototypes.

Material Properties

Ultimate Tensile Strength

30 MPa / 4000 PSI

Elongation at Break

n/a

Heat deflection temperature

45°C / 113°F @ 0.45 MPa

YOU MIGHT ALSO BE INTERESTED IN

3D Printing vs Injection Molding

3D printing and injection molding are each used to produce plastic parts. However, these processes are not mutually exclusive because some projects that begin with 3D printing end with injection molding.  3D printing is typically used for early-stage prototypes, evolving designs, and part geometries that can’t be produced with other methods. Because this form of […]

Learn More

3D Printing Materials Overview

Fictiv offers a variety of 3D printing materials and can produce parts using Stereolithography (SLA), Selective Laser Sintering (SLS), Fused Deposition Modeling (FDM), Multi Jet Fusion (MJF), and Carbon Digital Light Synthesis (DLS)  technologies. For each of these 3D printing processes, the table below lists the available materials and colors along with their average lead […]

Learn More