Sign in Get Instant Quote

Finishing Services

Chem film or Alodine™

Chromate Conversion Coating

At a glance

Applicable Materials

Aluminum

Colors

Clear, Gold

Applications

Tools, hardware, electrical systems

Thickness

0.25-1.0 µm0.00001-0.00004 inches

About the Process

Chromate conversion coating, more commonly known as chem film or by its brand name Alodine™, is a chemical coating that passivates and protects aluminum from corrosion. It is also used as a base layer before priming and painting parts. The standard most commonly specified in engineering applications is MIL-DTL-5541F, which refers specifically to coating of aluminum alloys.

This protective layer is much thinner than an anodizing layer, and while both are created by immersion of parts into a bath, Chem film or Alodine™ is a simple chemical coating and the process does not use electrical current.

Chem film or Alodine™ is a slightly cheaper process than anodizing, though it is more prone to scratches, wear, and cosmetic damage. The most common color of the coating is an iridescent greenish-gold, and thus it may also be used for cosmetic purposes. However, this color comes from hexavalent chromium, which is toxic, so for RoHS compliance needs, there are clear versions of the coating available as well.

Design considerations

  • Plugging threaded/reamed holes not required unless tolerances are very tight, as thickness change is minimal.
  • Chem film or Alodine™ coatings offer a much greater electrical conductivity than bare aluminum
  • Media Blast parts before Chem film or Alodine™ to create a more consistent coating that hides small machine marks

YOU MIGHT ALSO BE INTERESTED IN

US Machine Shops: How Tariffs and Recent Supply and Demand Trends Shape the Market

For U.S. machine shops, the last few years have been anything but steady, marked by an unpredictable mix of tailwinds and headwinds. Reshoring and record factory construction have boosted demand, while tariffs and cost inflation continue to tighten margins and blur forecasts. Here’s a clear-cut view of what’s gaining traction, what’s slowing, and how to […]

Learn More

Prototyping In-House vs Outsourcing: The ROI for Mechanical Engineering Teams

As product development cycles accelerate, engineering leaders face a recurring strategic question: How fast can we prototype—and where does it make financial sense to build? With premium compensation levels for mechanical engineers (especially with seniority and years of experience), the opportunity cost of hands-on prototyping has never been higher. When factoring in loaded labor rates, […]

Learn More

Also of Interest