Engineering Photopolymer

UMA 90

3D Printed UMA 90 — Engineering Resin for Functional Assemblies

Get Instant Quote

At a glance

Process

Carbon DLS

Colors

Red, Blue, Yellow, White, Black

Resolution

0.075 mm

Max Print Size

189 x 118 x 326 mm

About the Material

UMA 90 is a one-part rigid resin similar to conventional SLA resins. It is available in white, black, grey, cyan, yellow, and magenta colors that may be mixed freely to your specification before printing. As a one-part resin, UMA 90 it can be printed quickly and cheaply. It is well suited for producing manufacturing jigs, fixtures, and general purpose prototypes.

Integrity

Extreme Toughness Icon

Aesthetic

Extreme Toughness Icon

Material Properties

Ultimate Tensile Strength

30 MPa / 4000 PSI

Elongation at Break

n/a

Heat deflection temperature

45°C / 113°F @ 0.45 MPa

You Might also be Interested in

Line chart showing per-part cost dropping as order quantity increases from 1 to 100, with a highlighted savings zone and key points labeled (e.g., $80 at 5, $50 at 10, $32 at 25, $26 at 50, $23 at 100).

The Manufacturing Cost Curve: How Quantity Affects Per-Part Price

Request a quote for a single CNC-machined part, then request one for 50 of the same part. The per-unit price…

Header image: ‘Manufacturing Process Selection: 5-step framework’ with five connected steps: Step 1 Volume and timeline, Step 2 Geometry constraints, Step 3 Material requirements, Step 4 Tolerance and surface finish, Step 5 Cost model.

Manufacturing Process Selection: A Guide to Choosing the Right Production Methods

The manufacturing process you select impacts part cost, lead time, achievable tolerances, material options, and how easily you can iterate…